Scanline › Fault codes › Air metering
P2015Intake manifold runner position sensor range/performance (bank 1)
P2015 means “Intake manifold runner position sensor range/performance (bank 1)”. It's a generic powertrain code (fuel, air metering and emission controls), so it means the same on every make, including VW, Škoda, Audi, SEAT and Cupra.
- Not urgent
- SystemAir metering
- TypeGeneric (same on all makes)
How urgent is it?
Usually not urgent; often emissions-related.
Which system and module
Scanline files it under Air metering. The first letter, P, means powertrain (engine, transmission, emissions).
Usually stored by the engine control unit (VCDS address 01, Engine).
What usually causes it
- Intake manifold flap linkage or actuator
Typical causes are a starting point, not a diagnosis of your car.
What a shop would usually check first
The sensor and its wiring; implausible signals often come from a connector or a damaged sensor.
Related codes
Got this code on your car?
Paste your whole scan into Scanline to see which faults are current and which are old news. It runs in your browser; nothing is uploaded.
Open ScanlineScanline explains fault codes; it isn't a repair authority. This page explains what the code means; it can't tell you what is wrong with your car. Ross-Tech's wiki has their own notes on VW Group faults.